Xugong Engineering Machinery Co., Ltd.
Xugong Engineering Machinery Co., Ltd.
Add to Cart
The XC938-EV pure electric loader adopts a single-pump split-flow quantitative hydraulic system and pilot control of the working device, which is precise and easy to operate.
The whole machine is equipped with a 180.5kW·h lithium iron phosphate battery and supports dual-gun fast charging, with a charging time of only 45 minutes at the shortest (equipped with a 240kW charging pile). The battery thermal management system is intelligently controlled by the BMS, which is safe and reliable. The XC938-EV electric loader can choose 1.8-3.0 m series buckets, wood clamps, grass grabbers and quick-change tools.
Product introduction
Travel motor
Adopting single-motor travel drive technology, the whole machine travel system adopts one motor, which is connected to the drive axle through the transmission shaft to optimize power matching, so that the whole machine has greater torque output and faster response speed.
The motor adjusts the speed in real time according to the throttle opening to achieve stepless speed change of the whole machine.
Drive axle
Adopting self-made reinforced drive axle, the bridge shell is optimized, the cross-section of the shell is enlarged, and the load-bearing capacity and bending resistance are increased by 10%.
Strong engineering machinery drive shaft, strong impact resistance, high power transmission reliability.
Finite element analysis is performed on key structural parts to reduce stress concentration, eliminate local weaknesses, and ensure that all kinds of harsh working conditions are met.
The front and rear frames are designed for heavy loads, with thick steel plates, high strength and strong load-bearing capacity.
Reasonable layout, simple structure, reduced pressure profiles and irregular welds, strengthened important load-bearing parts, and can withstand torque and impact loads under various working conditions.
Increasing the distance between the upper and lower hinge pins of the hinge center and dispersing the force at the hinge can reduce the stress of the hinge pin and increase the service life of the bearing.
The working device is optimized and designed with a single rocker arm, short tie rod, and horizontal boom cylinder. The Z-type reverse six-link structure has small unloading impact and excellent operating performance and efficiency.
The main hinge point adopts a two-stage dustproof structure, which can effectively prevent dust and protect the grease from contamination, and provide reliable protection for the hinge pin and sleeve.
The main wear-prone parts of the bucket are made of wear-resistant plates, and the bucket has a long service life.
The new micro-pressurized cab has a large space, a wide field of vision, and good sealing.
The high-performance shock absorber is connected to the frame, which greatly reduces the vibration of the cab.
The mechanical shock-absorbing composite control seat is comfortable to operate.
Intelligent temperature-controlled high-power heating and cooling air conditioner has a suitable operating temperature.
| Project | Unit | XC938-EV |
| Rated Load Capacity | kg | 3500 |
| Rated power | kW | 156 |
| Overall weight | kg | 11600±200 |
| Uninstall height | mm | 3120 |
| Maximum lifting force | kN | 105±5 |
| Truck Crane | KATO | NK200E, NK250E, NK300E, NK400E, NK500E, NK800E, NK1000, NK1200, NK1200E |
| TADANO | TG250, TL250, TL250E, TL300E, TG300E, TG350E, TG450E, GT550E, TG550E, TG650E, GT650E, | |
| Rough terrain Crane | KATO | KR25H, KR45H, KA300, SS500.KR250E, KR450 |
| TADANO | KR250E,KR350E, TR250M, TR300M, AZ300D, AR350, TR450E, TR500M | |
| Crawler Crane | HITACHI | KH700, KH120T, KH125, KH150, KH180 |
| KOBELCO | 50T, 100T, 120T, 300T | |
| SUMITOMO | 50T, 100T, 200T | |
| Excavator | Hitachi | EX100, EX100WD, EX120, EX200, EX200LC, EX220, EX300, EX350, EX450, ZX70, ZX120, ZX150 |
| Caterpillar | 200, 235, 305, 307, 312, 320, 330, 324, 325, 345 (From Model B to Model D) | |
| Komatsu | PC50, PC60, PC100, PC120, PC130, PC200, PC210, PC220, PC300, PC350, PC400, PC450 | |
| Kobelco | SK100, SK120, SK200, SK350 | |
| Daewoo | DH55, 60, 130, 150, 220, 225, 300 | |
| Hyundai | 130w, 150w, 200, 210, 220, 225, 290, 305 | |
| Volvo | EC210, 240, 290,360,460,700 | |
| Loader | Caterpillar | 916, 924, 928, 936, 938, 950, 966, 980, 988 (From Model C to Model H) |
| Komatsu | WA100, 230, 250, 300, 320, 350, 360, 380, 400, 430, 470 | |
| Kawasaki | 70, 70B, 80Z, 85Z, 90, 90Z, 95Z | |
| Backhoe Loader | JCB3CX, JCB4CX, CAT416,CAT428 | |
| Bulldozer | Caterpillar | D6D, D6H, D6R, D6G, D7H, D7G, D7R, D8K, D8R, D8N, D8L, D9N, D9R, D10N |
| Komatsu | D50P, D60P, D65, D85, D155 | |
| Motor Grader | Caterpillar | 12G, 14G, 120G, 140G, 16G, 140H, 160H, 140K |
| Komatsu | GD511A, 605A, 623
|
Packaging and shipping
1. Containers are the cheapest and fastest
2. Bulk carriers are better for large construction equipment
3. Flat rack is better for large construction equipment and does not need to be disassembled
4.RoRo ships are fast and good for all kinds of machines
You can choose any transportation according to your needs
5. FOB, CRF and CIF are all acceptable.
We can ship the machine in bulk as a whole, or we can load it in a container and disassemble it on some parts of the machine, or we can ship it on a flat rack. We can choose the way according to your requirements.
Packaging details: Packaging will be as per customer requirements
Delivery time: 2 working days
Experienced international trade team provides the best full set of services
our service
1) Original parts and good working condition;
2) Low working hours and high work efficiency;
3) Strong work motivation and good stability;
4) Complete accessories and no oil leakage;
5) Competitive price and good skills;
6) Good after-sales service
We hope you can give us the opportunity to negotiate with you by email or phone, or come to Shanghai face to face, we are honored to contact you and serve you, and we promise to provide you with the best prices and services:
1) Book a hotel for you
2) Pick you up at the airport
3) Freely translate for you and guide you when you are free
4) 6 months to 1 year product and after-sales service warranty
We can assure you of the quality of our used construction machinery and provide you with the most competitive price since we
have professional staff to search for the cheapest and best machines from all over China. Besides, we have skilled workers to
refine old machines if you need. You are very welcome to come here and inspect by yourselves. Your satisfaction is our priority.
If you are interested in any of our used construction machinery, please feel free to contact us.
1. How to guarantee the condition and lifetime of the machine ?
A: We choose good condtion and less hour used machines. We are available for third part certificate of all of the machines.
And they are all available for your inspection in its place.
2. How to have after sale service from us ?
A: We have old suppliers in China, used or new parts are available for us to get, with reasonable price and in short time.
3. How can customers make visit and checking in China ?
A: We arrange everything ready for your jouney in China, welcome your happy visit!~